 |
| Place of Origin: | USA |
| Brand Name: | GE |
| Model Number: | DS3800NTBD |
| Minimum Order Quantity: | 1 |
|---|---|
| Price: | negitiation |
| Packaging Details: | in box |
| Delivery Time: | 3-5days |
| Payment Terms: | T/T, Western Union |
| Supply Ability: | 100 |
| Product Name: | Control Circuit Board DS3800NTBD | Product: | Printed Circuit Board |
|---|---|---|---|
| Model: | DS3800NTBD | Brand: | GE |
| CARRIER: | Ethernet Interface Module | Inches: | 8 Inches |
| Country Of Origin: | USA |
Product Description
The DS3800NTBD is a PCB designed to function as a component for the Mark IV series. The Mark IV manages gas and steam turbines and is built with triple-redundant backups on all critical controls and parameters to diminish downtime created by electronics failure.
The DS3800NTBD is a termination module for the larger DS3820STMA card. A termination module connects field wiring to I/O cards. Most terminations modules are designed to be DIN rail mounted. Termination modules may be digital, analog, or special function.
The DS3800NTBD is a smaller board. It is built factory drilled and has screw mounts for DIN rails. It also has two other screw mounts located near the center of the board. The board has been marked with the codes NTBD 6DA05 and NTBD 6FA05.
The DS3800NTBD is built with two rows of spare plated through holes (PTH.) It has twelve ceramic-covered metal film resistors, which are placed parallel to each other along the top edge of the board. It is worth noting the resistors do not run in sequential order, but rather run R1, R3, R2, then R4 through R12.
The DS3800NTBD has three PCB mating connectors. This includes one 37-pin female connector (J1,) one 37-pin male connector (J2,) and one 38-pin male connector (J3) that is marked 218A4807P5 87942-5. J1 and J2 also have screw connects at either end of their pin connections.
The DS3800NTBD has twelve jumper switches populating the board. These are located in four rows of three. All are individually labeled. Each switch can be set either to T or to O. It is worth noting these jumper switches begin at “J4,” as the mating connectors on the board have been labeled J1 through J3. The first row of jumpers (J4-J6) is labeled RST. The second row (J7-J9) is labeled ADB2. The third row (J10-J12) is labeled ADB5. The fourth row (J13-J15) is labeled PAR.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| ABB Module | AB Module 1756-,1759- Tourch Screen 2711- |
| Mitsubishi Drive MR- , Motor HA -,HC | Emerson MoudlesVE- ,KJ - |
| Fanuc motor A0-, Drive | Yokogawa transmitter EJA- |
| Rosemount Transmitter 3051- | Schneider Module 140- |
| Panasonic Motor , Drive MH- | Siemens Module 6ES-, Touch Screen 6AV- |
Similar prodcut for GE
DS3800DDCD181A
DS3800DDCD18IA
DS3800DDCD18LA
DS3800DDCD1BIA
DS3800DDCD1BLA
DS3800DDCDI81A
DS3800DDCDI8IA
DS3800DDCDI8LA
DS3800DDCDIB1A
DS3800DDCDIBIA
DS3800DDCDIBLA
DS3800DDCDL81A
DS3800DDCDL8IA
DS3800DDCDL8LA
DS3800DDCDLB1A
DS3800DDCDLBIA
DS3800DDCDLBLA
DS380ODDCD181A
DS380ODDCD18IA
DS380ODDCD18LA
DS380ODDCD1B1A
DS380ODDCD1BIA
DS380ODDCD1BLA
DS380ODDCDIB1A
DS380ODDCDIBIA
DS380ODDCDIBLA
DS3800DDCD1B1A-A
DS3800DDCD1B1A-B
DS3800DDCD1B1A-C
DS3800DDCD1B1A-D
DS3800DDCD1B1A-E
DS3800DDCD1B1A-F
DS3800DDCD1B1A-G
DS3800DDCD1B1A-H
DS3800DDCD1B1A-I
DS3800DDCD1B1A-J
DS3800DDCD1B1A-K
DS3800DDCD1B1A-L
DS3800DDCD1B1A-M
DS3800DDCD1B1A-N
DS3800DDCD1B1A-O
DS3800DDCD1B1A-P
DS3800DDCD1B1A-Q
DS3800DDCD1B1A-R
DS3800DDCD1B1A-S
DS3800DDCD1B1A-T
DS3800DDCD1B1A-U
DS3800DDCD1B1A-V
DS3800DDCD1B1A-W
DS3800DDCD1B1A-X
DS3800DDCD1B1A-Y
DS3800DDCD1B1A-Z
Product Description
The DS3800DBIB is a small printed circuit board (PCB) designed as part of the Speedtronic (Mark IV) line manufactured by GE. The Speedtronic system is designed to sequence turbine fuel and to sequence turbine systems and their auxiliaries for startup. The Mark IV system is designed with a distributed control system which runs on an array of interconnected microprocessors. When one section of this gridwork fails, turbines will continue to work under the control of other parts of the system. In this way downtime is limited. The DS3800DBIB is designed specifically as an interface board.
The DS3800DBIB is a small daughterboard that works as a plug-in to another, larger PCB. It has been drilled out at the factory, one hole in each corner of the board. This board also has four connectors numbered 1 through 4. It has two small screw mounts covered by black tabs. The first mount is marked C101 and is positioned next to a ring marked TP1. The second is not marked and positioned next to a ring marked TP2. The DS3800DBIB has one capacitor rated 708A1, M/E 200V 1.0 +10%. It also has one blue potentiometer located on the edge of the board that is wired for variable resistance. There are ten resistors and six small capacitors marked 'cr' on the DS3800DBIB PCB
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass production.
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Contact Person: Harper
Tel: 86-13170829968
Fax: 86--25020661
