HF-KN13 Mitsubishi Electric Industrial Servo motor 100W 3AV 0.8A No electromagnetic brake

HF-KN13 Mitsubishi Electric Industrial Servo motor 100W 3AV 0.8A No electromagnetic brake

Introduction of Industrial Servo Motors

The servo motor with an electromagnetic brake can be used to prevent a drop in vertical lift applications or to ensure double safety at an emergency stop, for example. When operating the servo motor, supply power to the electromagnetic brake to release the brake. Switching power off enables the brake.

Though the brake lining may rattle during operation, it poses no functional problem. If braking sounds, it may be improved by setting the machine resonance suppression filter in the servo amplifier parameters. For details, refer to each servo amplifier instruction manual.

In addition to the straight shaft, the key shaft and D cut shaft are available as the servo motor shafts. The key shaft and D cut shaft cannot be used in very frequent start/stop applications. Since we cannot warrant the servo motor against fracture and similar accidents attributable to a loose key, use a friction coupling, etc. when coupling the shaft with a machine. The shaft shape of the standard servo motor changes depending on the series and capacity. Refer to the chapter of the servo motor series.